VW T2 67-79 Windshield seal pre-formed without trim groove 211845121

Optimal protection with the VW T2 67-79 windshield rubber

Please note: A-quality!

A part that will come up in every restoration is the window rubbers; in most cases, these are weathered, leading to leakage. A high-quality rubber is an important aspect; lower quality can lead to leakage and premature drying out of the rubbers.

Standard window rubbers do not have a trim groove; these rubbers were frequently used by Volkswagen on the cheaper VW models and all VW Buses up to 1967. For the VW Beetle, the window rubbers are available separately in addition to complete sets for all other models, individually.

The cause of leakage is, in most cases, due to the rubber not fitting properly to the bodywork; with pre-formed corners, the rubber fits perfectly to the bodywork, making leakage impossible.

Mounting window rubbers is easiest with a piece of string, and you do it as follows:

1. Clamp the rubber around the glass
2. Place a piece of string in the groove that will later fall into the bodywork
3. Lubricate the window rebate with, for example, dish soap
4. Press the window with rubber and string against the rebate
5. Slowly pull the string from the inside so that the rubber falls over the raised bodywork edge
6. Once mounted, press the window firmly into the rubber everywhere and check from the inside that the rubber is properly seated in the rebate everywhere

Mounting the window rubbers only works if you are two people; one presses the window firmly into the rebate and the other slowly pulls the string out from between the rubber from the inside. Where the string meets, overlap them a little; this will make it easier when pulling in the window later.

Optimal fit of the VW T2 bus windshield rubber

The VW T2 bus windshield rubber is specially designed for models from 1967 to 1979 and ensures a perfect connection around the windshield. Thanks to its pre-formed shape, the rubber fits precisely without a trim groove, providing a tight and durable seal. This prevents water leakage and drafts, which is essential for preserving the interior and driving comfort. The fit is precisely matched to the contours of the original VW T2, making installation easy and without modifications.

Matching pre-formed VW T2 67-79 Windshield Rubber without trim groove

The VW T2 67-79 Windshield Rubber is specifically designed for a perfect fit on 1967 to 1979 Volkswagen T2 models. This pre-formed rubber provides a strong seal around the windshield without the need for a trim groove. Thanks to this feature, installation is easier and faster, without sacrificing durability. The rubber seals precisely, preventing drafts, water ingress, and vibrations while driving. This product is ideal for restorations and replacement of worn or damaged windshield rubbers.

Durable material and long-lasting protection of the VW T2 67-79 Windshield Rubber

Made of high-quality rubber, this VW T2 67-79 Windshield Rubber combines flexibility and wear resistance. The material is resistant to weather influences, UV radiation, and temperature fluctuations, ensuring the rubber strip maintains its shape and sealing properties for a long time. This contributes to extending the lifespan of the windshield and prevents water leakage that can cause damage to the interior. This quality ensures that you do not have to constantly replace it and invest in a durable solution.

Easy installation and compatibility with Volkswagen T2 models

The VW T2 67-79 Windshield Rubber is designed for seamless installation without professional knowledge. Thanks to its pre-formed design, the rubber is ready for immediate placement without complicated adjustments. The product is perfectly compatible with various T2 models from the mentioned model years. This makes it a reliable choice for both hobbyists and professionals who want to restore their Volkswagen bus to its original condition. With this windshield rubber, you achieve a result that meets the original specifications both functionally and aesthetically.