Sliding Door Hinge Roller Bearing VW T2 67 – 79 211 843 359 B

Sliding door hinge roller bearing VW T2 67 – 79 211 843 359 B

This roller bearing is located in the hinge of your T2 sliding door and ensures that the door opens and closes smoothly and without much resistance. After years, you may notice that the door is harder to operate or rattles, often due to a worn roller bearing. Replacing it will restore the smooth operation you expect from a well-functioning T2 door. Combine this with a new hinge if the original has a lot of play.

Small upgrade, big difference This roller bearing is located at the pivot point at the rear of the sliding door. Despite its modest size, it is essential for the door's balance during opening. A new bearing ensures the door slides back with minimal effort and prevents unnecessary play in the hinge mechanism.

Key features:

• Product: High-quality roller bearing for the middle sliding door guide.

• Silent operation: Ensures smooth, rolling movement without metal-on-metal contact.

• VW T2 Compatible: Suitable for all Volkswagen T2 Panorama Buses from 1967 to 1979.

• Wear-resistant design: Manufactured from durable materials that withstand the pressure of the sliding door.

Technical specifications:

• Application: Middle sliding door hinge (rear of door).

• Years of manufacture: 08/1967 – 07/1979.

• Reference number: 211 843 359 B.

• Type: Horizontal guide bearing.

Expert assembly tip: When replacing this bearing, also check the vertical bearing and the hinge bolt. Clean the rail on the side of the bus thoroughly with a degreaser before installing the new bearing. A small amount of dry lubricant (such as PTFE/Teflon spray) in the rail helps keep the bearing smooth without sand or dust sticking to it, significantly extending its lifespan.

Order this sliding door roller bearing and enjoy a smoothly sliding door on your VW T2 again!